|
1. How to achieve flash card through a channel and making payment at the same time?
Mount SK10MP or SK100MP-CN at the entrance of the passage.
When card is flashed, controller will detect for valid card
and time zone setting; follow by checking the value inside
the card and deduct amount accordingly. During this time
user name and, deducted amount and balance will be displayed
on the LCD. If value in card is insufficient, ¡°Insufficient
Balance¡± will be displayed. Only full amount deduction will
trigger door relay to open door. Controller can be setup
to 32 groups of payment periods to accommodate different
charges at different time interval.
Using this with SKEPS-POS system, can accomplish basic
operation such as load value, refund, summary, query and
etc. This application is useful to apply at places like
canteen, amusement park, fitness center, swimming complex
and etc.
2.How to achieve auto calculation when accessing a channel?
Making use of the PLC capability in SK800 controller, when
card is flashed, activate the relay in controller to drive
the calculator. This function is very useful for evacuation
purpose. When accident e.g. fire, will be able to know the
number of people being trapped. It doesn¡¯t require involvement
of networking and computer. It will become a unique solution
if use together with long range card and card reader.
3. How to achieve flash card for time attendance then can go through barrier at gate?
Connect time clock wiegand output via SKDC to SK800. Set
SK800 direction control to APB. When card is flashed, Card
No. will be passed to controller, when reaches gate, flash
card again to go through gentry.
4.How
to achieve pay per usage on elevators?
Basic usage is the same with Access Payment. The only thing
to take not is, connect SK10MP wiegand output to SKDC, then
to SK800L Lift Controller.
5.How
to achieve taking picture when passing through the channel?
Making use of Smartkey image capturing tools, it supports
to capture image when card is flashed. Image captured will
be stored in designated path, can be query according to
staff id or card id. Can also connect 2 cameras with a video
card.
[Back To Top]
|
