[Principle]
Connect controller to normal telephone line. Visitor
needs to key in tenants fix phone number (land line
number or mobile number) or tenant’s unit number or
select from listed room number on the display screen
to get in touch with the tenant. After verification,
tenant via a key press on the phone will be able to
remotely open the door.
Tenant is able to use following mode to open door:
card only, card + PIN, fingerprint, fingerprint +
PIN and etc. At the same time, image capturing is
possible and monitoring can be via IE Browser.
[Features]
◆
Using 32 bit ARM chip set, operate on Linux
OS, speed up to 200MHz
◆ Direct connection
to PC via TCP/IP port. Transmission speed up to 100Mbps
◆ Maximum 10,000 card
holders and 100,000 lines transaction
◆ Make use of existing telephone line to communicate with resident. Need not have dedicated lines from
main intercom to each resident unit.
◆ Waived off cabling and use the existing resident telephone
◆ Able to capture visitor's image or person who swap the card
◆ Build-in web server,
online surveillance via IE browser
◆ Transaction data can be exported via USB thumb drive in TXT format
◆ Visitor only needs to key in room no. or unit no or search unit no. from list using tenant's name
◆ Can only make call to tenant's number that is already been registered in the system
◆ Call can be route to mobile phone should there be no answer and initiating remote open door action
◆ Support EM/Mifare/TI/HID card. (Can also use fingerprint verification but only applicable to indoor used)
◆ Able to set "Do Not Disturb" in required period of time for resident
◆ One telephone line can connect to 6 units of SKTES
◆ Suitable to use at main entrance of condominium, villa, hostel, office, important warehouse etc
◆ CE Certified
[Functions]
| Functions |
Description |
| Visitor Call Type |
1. Use keypad to enter resident's room number or unit number
2. Search through list of residents by name
|
| Communication |
Connect normal telephone line or extension line to controller to communicate with resident.
Need not to have dedicated line to every residence. |
| Paging Limitation |
Only able to call number that is being registered to the system |
| Remotely Open Door |
Resident can remotely open door by just a key pressed on the phone after identify the caller.
Key can be set according to resident preference |
| Image Capture |
Support. 8KController keeps up to 800 images, expandable to 100,000 with 1GB SD card. Image size at 8K.
|
| Monitoring |
Built-in
Web Server, viewing can be via IE Browser |
| Export Data |
Via USB thumb drive in TXT format |
| Do Not Disturb Mode |
Can be set to certain time frame to avoid nuisance
call and to protect resident daily lifestyle and
work |
| Centralized Control |
One telephone line can connect 6 SKTES system. Saving system cost |
| Phone Notification |
Consists of engagement tone, ringing tone, indication tone |
| Speakerphone |
Build-in microphone and speaker that can talk directly to resident |
| Waterproof |
Waterproof designed. Stainless steel casing and metal keypad suitable for outdoor used. |
| Welcome Text |
Can be set |
| Open Door Method |
Use Card, Card + PIN, PIN method to open door. If integrating with fingerprint module, thus inheriting SK100NT-F open door mode, e.g fingerprint open door |
| Support Card |
EM, Mifare, TI, or HID card |
| Standalone |
Can add / delete residence information and necessary setup using keypad and LCD. Need not required software. |
| Connect with Computer |
1. Via 485 or TCP/IP
2. Setup controller Device ID 001 - 255 via keypad
3. Setup IP address, Subnet Mask and Gateway via keypad |
| System Software |
SKEMS or SKEPS |
| Others |
Inherits all functions from SK100-NT |
[Technical Specification]
| Parameters |
Description |
| CPU |
ARM9, processor speed up till 200MHz |
| Operating System |
Linux |
| Control Door Area |
1 |
| Telephone Line |
1 telephone line can connect up to 6 controllers |
| Connect wiegand reader |
2 |
| Magnetic Sensor Signal |
1 |
| Push Button Signal |
1 |
| TTL Alarm Input |
1 |
| Door Open Relay |
1个，12V/1A |
| Alarm Relay |
1个，12V/1A |
| TTL Alarm Output |
1个，5V/300mA |
| Tamper Switch |
1 |
| Card Capacity |
10,000 |
| Card Matching Speed |
<0.5 seconds when controller card storage reaching 10,000 cards |
| Transaction Capacity |
100,000 lines |
| Tenant Unit's No. |
Can be set to 16 alpha numeric characters long. |
| Registered Telephone No. |
16 digits long |
| COM Port |
1. 2 ports
2. Com 1: RS-485communicate with PC
3. Com 0: RS-232/485 Debugging used. Default is RS-232 |
| TCP/IP |
1, communicate with PC at 10M/100M |
| USB |
2 Master USB |
| SD Card |
1 |
| Microphone |
1 |
| Speaker |
1 |
| Camera |
1 (Optional) |
| Operation Keypad |
128x64 dots LCD, Outdoor Type: 4x4 metal keypad；Indoor Type: 4x4 standard keypad |
| Buzzer |
Yes |
| Clock Power Battery |
CR2015,3V |
| Supply Voltage |
9-30V/400mA |
| Operation Temperature |
-10~50 °C |
| Dimension |
Outdoor Type: 307 X 160 X 115 mm
Indoor Type: 230 X 126 X 35 mm |
| Housing |
Outdoor Type: Stainless Steel Casing, waterproof designed.
Indoor Type: ABS flame-resistant, silvery gray color |
[Choosing A Model]
| Model No. |
Description |
| SKVTES |
Outdoor Type，Stainless steel casing，Waterproof，Metal keypad |
| SKVTES-IN |
Indoor Type, ABS casing |
| SKVTES-E |
Outdoor Type with EM Reader.
Reading Distance: >10cm |
SKVTES-E-IN |
Indoor
Type with EM Reader. Reading Distance: >10cm |
SKVTES-M |
Outdoor Type with Mifare Reader. Reading Distance >2.5cm |
SKVTES-M-IN |
Indoor Type with Mifare Reader, Reading Distance: >2.5cm |
[Application
Area]
◆ High Class Condominium
◆ Offices
◆ Student Dormitory
◆ Laboratory
◆ Ordnance Storage
[Relevant Information]
Current page in MS Word document
SKTES Product Manual
SKVTES Product Manual
Wiring Diagram
Installation Measurement
Telephone Access Control System's Plan Templates
Camera Technical Specification
[Related Links]
Learn more about telephone access control systems
Product Certification
|
|
