| Function |
Description |
| Card Open Door
|
Connect wiegand reader or RS-485
reader
|
| Card + PIN Open
Door |
1. Connect SK10K, Sk100K-CN Chinese
series keypad reader via wiegand
or RS-485
2. Connect SK100K keypad reader via RS-485
3. Choose either PIN or Card ID to open door
4. Card + PIN open door: require 4 digits PIN;
PIN only open door:
require 8 digits PIN |
| PIN Open Door |
| Card ID Open
Door
|
| Fingerprint Open
Door
|
Connect SK fingerprint card reader
via wiegand. At the same time the following mode can
be implemented: Card + Fingerprint, ID + Fingerprint,
Fingerprint + PIN, Card + Fingerprint + PIN, ID +
Fingerprint + PIN, Card Only, Card + PIN, PIN Only
, Card ID Only etc |
| Super User Card Open Door |
In
case of emergency or system failure, make use of super
user card to open door. (used with universal reader)
|
| Connect External
26/32 Wiegand Card Reader
|
Yes |
| Connect Free
Wiegand Card Reader |
Yes |
| Connect External
Keypad Reader |
1. HID wiegand keypad reader via
wiegand connector
2. SK series keypad reader (inclusive of Chinese series
reader, SK100K keypad
reader)
3. SK series universal reader |
| Connect External
SK Fingerprint Reader
|
Via Wiegand |
| Communicate
with SK800 |
Via RS-485 |
| Push Button Open
Door |
Yes |
| Door Sensor Monitoring |
Yes |
| Tamper Alarm |
Yes |
| Terminal Resistance
|
Determine via jumper setting |
| Device ID Setup |
Via jumper setting |
| Power Monitoring |
Main power supply failure alarm and
backup battery low voltage alarm
|
| Connect External
Battery
|
Yes. Automatic redirect to backup
battery when power failure |
