Functions

SK10

SK100

SK100-CN

Card Open Door

Connect wiegand reader

Card + PIN Open Door

1. Using Access Controller
2. Connect external SK10K or SK100K-CN (Chinese version keypad      reader) via wiegand connector. Set it to free wiegand.
3. Select either PIN only or Card ID only to open door.
4. Card + PIN open door: 4 digits PIN; PIN only open door: 8 digits PIN

Card ID Open Door

Conect External Wiegand Reader

Connect External 26/32 Wiegand Card Reader

Free Wiegand Setup

Yes. Can set low battery voltage alarm when use with long range card reader.

Connect External Keypad Reader

1. HID wiegand keypad reader
2. SK Chinese keypad reader, via wiegand connector

Connect External SK Fingerprint Reader

Yes

Communication with PC

RS-232/485 or TCP/IP ( require TCP/IP converter)

Push Button Open Door

Yes

Door Force Open Alarm

Yes

Door Open Too Long Alarm

Door open delay can be set from 1~255 seconds. Factory default is 5 seconds. Alarm can be disabled.

Add & Delete Cards During Offline

Yes

Multi-cards Verification

Max. 8 cards

Key Press Open Door

Using controller's keypad to open door. Factory default is set to false

When using Card + PIN open door and number of PIN > 3, controller will be disabled for 30 seconds.

Same Card Delay Control

0~255 seconds. Factory default is 0

Time Zone Control

32 groups of time zone

Holiday Control

Yes

Report Loss Card

Yes

Card Validity Control

Yes

Door Auto Release Time Zone

Yes

Connect External Printer

Yes

Connect External LED

No

Via 3rd COM port

No

Dynamic adjustment

No

Yes

No

Anti-passback

Yes, can be reset

Timeout Events

Yes

Arm & Disarm Alarm

Yes

Anti-tailgating

Yes

Time Correction

Yes

Card No. Output Byte

1~4. Default is 3

Card No. Display Format

HEX,DEC,ABA,USER CODE. Default is ABA

Communication Monitoring

Yes

In-built Buzzer Alarm

When door open too long or being forced open, can be set to turn on the alram. Factory default is set to false.

PIN Control

Can be set to "No PIN Control". Default is yes.

Time Zone Control

Can be set to "No Time Zone Control" Default is yes.

Tamper Alarm

Built-in Tamper switch. Trigger alarm event to PC when device is force open.

Reset Door Open Too Long

Yes

Terminal Resistance

Setup using jumper

Parameters

SK10

SK100

SK100-CN

CPU

16 bits

Control No. of Doors

1

Connect Wiegand Reader

2

TTL Alarm Input

1

Door Sensor Signal

1

Push Button Signal

1

TTL Alarm Output

1, 5V/300mA

Alarm Relay

1,12V/1A

1, 12V/10A

1, 12V/1A

Door Relay

1, 12V/1A

1, 12V/10A

1, 12V/1A

Tamper Switch

1

Card Capacity

10,000

Transaction Capacity

10,000

COM Port

2, one is using RS-485 to communicate with PC, another one using RS-232 to communicate with printer or other PC. (3rd port can be set as RS-485 port).

Baud Rate

1200-19200bps, Default is 19200bps

Device ID Setup

001-254 , Default is 1

Rechargeable Battery

Data store up to 6 months without power

Keypad

4x4, blue backlight

3x4, green backlight

4x4, blue backlight

LCD

128x64 dots, white backlight, chinese & english menu

16x2 dots, blue backlight, english menu

128x64 dots, white backlight, chinese & english menu

Buzzer

1 with valid and invalid indicator

Power Supply

9-30VDC,300mA

Operation Temperature

-10~50 °C

Dimension

130×83×24mm

152×106×36mm

158×112×37mm

Housing

ABS flame-resistant, silvery gray color

Model No.

Description

Remarks

SK10

Mini Chinese Series Controller

Able to communicate with PC

SK10E

Mini Controller with EM Reader.
Reading Distance >10cm

SK10M

Mini Controller with Mifare Reader.
Reading Distance: >2.5cm

SK10H

Mini Controller with HID 125KHz Reader.
Reading Distance: >4cm

SK10A

Mini Chinese Series Controller

Cannot communicate with PC

SK10EA

Mini Controller with EM Reader.
Reading Distance >10cm

SK10MA

Mini Controller with Mifare Reader.
Reading Distance: >2.5cm

SK10HA

Mini Controller with HID 125KHz Reader.
Reading Distance: >4cm