DESCRIPTION:

The pedestrian flap barrier is designed to control pedestrians entering or exiting restricted areas usually under surveillance,and in particular low security areas.Passage frequency is 30 people per minute.
Commonly used to control both directions,the barrier may operate with card access,token acceptor or other remote device which produces a clean contact closure for authorized passage.

TECHNOLOGY/FEATURES:
  -Drive system incorporates a 100%
  -Duty cycle magnetic brake motor
  -Limit switches or slipclutches
  -When in closed position,Electro-magnetic brake will   preventflaps   from being forced open
  -In the event of power failure,flaps open   automatically by   programme and can also remained   closed upon request
  -Minimum noise with cushioning rubber buffer & dynamic   braking
  -End modules with reserved space for card reader,token   container &   optional LED signage
  -Red polyethylene flap for better visibility

HOUSING:
The fabricated housing is folded from either 2mm thick electro-galvanized steel sheet or 1.5mm thick stainless steel of different grades.An epoxy powder coat provides corrosions protection and an attractive finish.The modules are then assembled together by bolts and nuts to form the housing.

AREAS OF APPLICATION:
  -Train Stations
  -Passenger Terminals
  -Rallway Platforms
  -Checkpoints
  -Airport Terminals
  -Sport Stadiums
  -Factory Prodution Areas
  -Recreational Facilities
  -Administration Buildings

SPECIFICATIONS: