SK100K-F
Series
Fingerprint Reader
[Features]
◆ Can store up to 1900 fingerprint,
matching time < 1 second. Expandable to 9500 templates on
board
◆ Matching Mode: 1:1, 1:N and
1:X
◆ Up to a maximum of 10 templates
for each user. Support duress alarm using 2nd template
◆ Sensor type: Optical or Capacitive
◆ FAR:Adjustable from 1/10,000
to 1/100,000,000 (FAR and FRR are diametrically opposed,increasing
FAR will lower FRR and vice-versa,eg:FAR=0.01%,FRR=1%)
◆ EER < 0.1%(Equal Error
rate is a figure discribing at what probablity FAR and FRR
is equal;the risk of accepting an
impostor is equally as small as the risk of rejecting a
legitimate user)
◆ Rapid matching
◆ Dual Finger Mode
◆ Operation Mode: Fingerprint
Only, Card + Fingerpring, ID + Fingerprint, Fingerprint
+ PIN, Card Only, PIN Only, ID Only
Card + PIN and etc.
◆ Wiegand 26/34 bit output.
Can be connect directly to SK100/200/400/SKDC range of controllers
◆ Built-in Card reader. Support
EM, Mifare, HID and TI Card. Can opt to store fingerprint
template into Mifare card
◆ Duress finger function. Activate
alram when duress finger is used to open door
◆ Connect to 1 wiegand 26/34
reader
◆ Multi-language menu support.
◆ 3 level of user rights: Super
User, Administrator and normal user
◆ 128x64 dots large display
with white backlight
◆ 4*4 Keypad with blue backlight
◆ Built-in Tamper switch
◆ Easy Installation. Dimension：158x112x33mm
[Technical Specification]
| Parameters |
Description |
| Fingerprint
Sensor |
Optical
or Capacitive |
| Fingerprint
Template Capacity |
1900, expandable to 9500 templates on board |
| Matching
Time |
<
1 seconds |
| Card
Reading Distance |
3.5-10cm depending on the reader model (some fingerprint reader
does not come with built-in card reader) |
| Communicate
with Controller |
via
Wiegand 26/34 |
| Wiegand
Input |
Can
be connected to 2 26/34 Wiegand Reader |
| Tamper
Switch |
1 |
| LCD |
128X64 dots with white backlight |
| Keypad |
4x4, with white backlight |
| Dimension |
158x112x37mm |
[Choosing a Model]
| Product
Model |
Description |
Standard Fingerprint Reader
Can be connected to SK100/200/400
|
| SK100K-FOP |
Fingerprint
Reader with Optical Sensor
|
| SK100K-FCP |
Fingerprint
Reader with Capacitive Sensor
|
| SK100EK-FOP |
Fingerprint Controller with EM Reader-optical sensor
|
| SK100EK-FCP |
Fingerprint
Controller with Mifare Reader-optical sensor |
| SK100MK-FOP |
Fingerprint Controller with Mifare Reader-optical sensor
|
| SK100MK-FCP |
Fingerprint Controller with Mifare Reader-capacitive sensor
|
| SK100HK-FOP |
Fingerprint Controller with HID Reader-optical sensor
|
| SK100HK-FCP |
Fingerprint Controller with HID Reader-capacitive sensor
|
|
