Feature:
◆ Door Interface for SK800
Controller
◆ Communicated with SK800 Controller
by RS485
◆ Door Control: 1 Door In/Out
◆ Support 2 Wiegand Readers
and 2 RS485 Readers
◆ Support 1 Door Sensor, 1
Push Button, 1 Emergency Switch and 1 Tamper Switch
◆ 4 TTL Input Points for Alarm
Sensors
◆ Support Backup Battery connected.
◆ Support 5 Super Master Cards
◆ 4 TTL Output to drive Reader’s
LED or Buzzer
SKDC
Door Controller Specification:
| Item |
Specification |
Remarks |
| Communications Mode |
RS485 |
With SK800 Controller |
| Door Control |
1 Door In/Out |
|
| Reader Output Format |
Wiegand or RS485 |
|
| Number of Readers |
2×Wiegand,2×RS485 |
|
| Super Master Card |
5 |
|
| Door Sensor |
1 |
Support Supervisory or Non-Supervisory |
| Push Button |
1 |
|
| Emergency Switch |
1 |
|
| Tamper Switch |
1 |
|
| Input Points |
4 TTL Input |
|
| Open Relay |
1 |
12VDC, 10A |
| Alarm Relay |
1 |
12VDC, 10A |
| Output Points |
4 TTL Output |
2 for Reader's In/Out LED and 2 for Reader's In/Out
Buzzer |
| Buzzer |
Yes |
|
| Baud Rate |
19,200bps |
|
| Controller ID |
1~8 |
By Jumper |
| Power Supply |
12VDC /200mA |
|
| Battery Backup |
Yes |
The controller charges up battery automatically and
switches to battery when main power fails |
| External Battery Low Signal |
Yes |
When battery is at lower 9.5v |
| Operation Temperature |
-10～55℃ |
|
| Storage Temperature |
0～35℃ |
|
| Dimensions (mm) |
160 X 80 X 22mm |
PCB |
Download
Relevant Details
◆
Technical
Manual
◆
Catalogue |
|
|
